Pullback Riser & 1 1/4" Low Bend Moto Bar Combination for 2023 CVO & 2024-2026 Street Glide Models (Gloss Black)
Note: 14" Setup In Photos and Videos
Note: Go up to 14" with zero screen blockage! ( 5' 6" rider and Taller)
Note: Does Not Fit 2024 Ultra Limited
NOTE: Setup height includes the Risers and the Moto Bar combined!
Low Bend Moto Bar is 2" tall
Introducing the Dominator Pullback Riser/Moto setup for the 2024-2026 Street Glide or 2023-2024 Street Glide CVO. The first of its kind featuring 1 1/4” diameter moto bar. This setup is available 100% plug in ready with the harness fully installed for quick and easy installation. We installed ours in under an hour. Through riser wiring means the wiring is not seen at all. The result is a super clean look. A direct fit with zero modifications needed. Go up to 14”s using the stock cables. Bold Dominator styling to fit the modernization of your fully redesigned Street Glide.
Designed to be an absolute direct fit for the 2024-2026 Street Glide. Including the slots to accommodate the additional factory wiring harness and control alignment pins.
ZERO Modifications Needed.
ZERO Wire Pulling.
All Extensions Included With The all In One Kit.
NOTES:
Bars Only = (Just the Pullback Riser & 1 1/4 Moto Bar Combination nothing else)
100% Plug In Ready = (The bars with internal wiring/extended harness only. Brake and Clutch extensions not included)
Complete All In One Kit = (The bars 100% Plug In Ready as well as the appropriate extended brake and clutch included. EVERYTHING you'll need for a clean installation)
The new 2023 1/2 and 2024-2026 touring models also have the factory twist grip sensor integrated within the controls along with the heated grip wiring. Plug in ready bars for these years no longer come with the twist grip or need to add heated grip wiring because it’s actually integrated into the controls. Harley-Davidson is always bringing innovation to the road year after year.
|
PRODUCT DETAILS |
|
Handlebar Diameter |
|
|
Base Width |
3.5 inches on center |
|
Over All Width |
30 inches |
|
Pullback |
3 inches |
|
Finish |
Gloss Black |
|
Rise |
As Advertised |
|
Fly by Wiring and Cable Throttle System |
Fully compatible with the 2024 Street Glide Fully compatible with heated grips. |
|
Fit |
Exclusively fits 2023 1/2 and 2024-2026 Street Glide models (Completely different design) **************** 2024-2026 ONLY***************** |
|
Style |
Pullback Riser Moto Bar Combination |
*MIRRORS AND CONTROLS ARE NOT INCLUDED ONLY FOR REFERENCE*
Note: 14" Setup In Photos and Videos
Note: Go up to 14" with zero screen blockage! ( 5' 6" rider and Taller)
Note: Does Not Fit 2024 Ultra Limited
NOTE: Setup height includes the Risers and the Moto Bar combined!
Low Bend Moto Bar is 2" tall
Introducing the Dominator Pullback Riser/Moto setup for the 2024-2026 Street Glide or 2023-2024 Street Glide CVO. The first of its kind featuring 1 1/4” diameter moto bar. This setup is available 100% plug in ready with the harness fully installed for quick and easy installation. We installed ours in under an hour. Through riser wiring means the wiring is not seen at all. The result is a super clean look. A direct fit with zero modifications needed. Go up to 14”s using the stock cables. Bold Dominator styling to fit the modernization of your fully redesigned Street Glide.
Designed to be an absolute direct fit for the 2024-2026 Street Glide. Including the slots to accommodate the additional factory wiring harness and control alignment pins.
ZERO Modifications Needed.
ZERO Wire Pulling.
All Extensions Included With The all In One Kit.
NOTES:
Bars Only = (Just the Pullback Riser & 1 1/4 Moto Bar Combination nothing else)
100% Plug In Ready = (The bars with internal wiring/extended harness only. Brake and Clutch extensions not included)
Complete All In One Kit = (The bars 100% Plug In Ready as well as the appropriate extended brake and clutch included. EVERYTHING you'll need for a clean installation)
The new 2023 1/2 and 2024-2026 touring models also have the factory twist grip sensor integrated within the controls along with the heated grip wiring. Plug in ready bars for these years no longer come with the twist grip or need to add heated grip wiring because it’s actually integrated into the controls. Harley-Davidson is always bringing innovation to the road year after year.
|
PRODUCT DETAILS |
|
Handlebar Diameter |
|
|
Base Width |
3.5 inches on center |
|
Over All Width |
30 inches |
|
Pullback |
3 inches |
|
Finish |
Gloss Black |
|
Rise |
As Advertised |
|
Fly by Wiring and Cable Throttle System |
Fully compatible with the 2024 Street Glide Fully compatible with heated grips. |
|
Fit |
Exclusively fits 2023 1/2 and 2024-2026 Street Glide models (Completely different design) **************** 2024-2026 ONLY***************** |
|
Style |
Pullback Riser Moto Bar Combination |
*MIRRORS AND CONTROLS ARE NOT INCLUDED ONLY FOR REFERENCE*
Original: $899.00
-70%$899.00
$269.70Description
Note: 14" Setup In Photos and Videos
Note: Go up to 14" with zero screen blockage! ( 5' 6" rider and Taller)
Note: Does Not Fit 2024 Ultra Limited
NOTE: Setup height includes the Risers and the Moto Bar combined!
Low Bend Moto Bar is 2" tall
Introducing the Dominator Pullback Riser/Moto setup for the 2024-2026 Street Glide or 2023-2024 Street Glide CVO. The first of its kind featuring 1 1/4” diameter moto bar. This setup is available 100% plug in ready with the harness fully installed for quick and easy installation. We installed ours in under an hour. Through riser wiring means the wiring is not seen at all. The result is a super clean look. A direct fit with zero modifications needed. Go up to 14”s using the stock cables. Bold Dominator styling to fit the modernization of your fully redesigned Street Glide.
Designed to be an absolute direct fit for the 2024-2026 Street Glide. Including the slots to accommodate the additional factory wiring harness and control alignment pins.
ZERO Modifications Needed.
ZERO Wire Pulling.
All Extensions Included With The all In One Kit.
NOTES:
Bars Only = (Just the Pullback Riser & 1 1/4 Moto Bar Combination nothing else)
100% Plug In Ready = (The bars with internal wiring/extended harness only. Brake and Clutch extensions not included)
Complete All In One Kit = (The bars 100% Plug In Ready as well as the appropriate extended brake and clutch included. EVERYTHING you'll need for a clean installation)
The new 2023 1/2 and 2024-2026 touring models also have the factory twist grip sensor integrated within the controls along with the heated grip wiring. Plug in ready bars for these years no longer come with the twist grip or need to add heated grip wiring because it’s actually integrated into the controls. Harley-Davidson is always bringing innovation to the road year after year.
|
PRODUCT DETAILS |
|
Handlebar Diameter |
|
|
Base Width |
3.5 inches on center |
|
Over All Width |
30 inches |
|
Pullback |
3 inches |
|
Finish |
Gloss Black |
|
Rise |
As Advertised |
|
Fly by Wiring and Cable Throttle System |
Fully compatible with the 2024 Street Glide Fully compatible with heated grips. |
|
Fit |
Exclusively fits 2023 1/2 and 2024-2026 Street Glide models (Completely different design) **************** 2024-2026 ONLY***************** |
|
Style |
Pullback Riser Moto Bar Combination |
*MIRRORS AND CONTROLS ARE NOT INCLUDED ONLY FOR REFERENCE*
